Futaba T6K Sändare T-Fhss R3006SB i gruppen Alla produkter / Radiostyrt / Tillbehör / Radioutrustning / Sändare / Futaba hos Hobbex (806437)
Futaba T6K Sändare T-Fhss R3006SB
Futaba T6K Sändare T-Fhss R3006SB
Futaba T6K Sändare T-Fhss R3006SB
Futaba T6K Sändare T-Fhss R3006SB

Futaba T6K Sändare T-Fhss R3006SB

Artnr
806437
The Futaba 6K has T-FHSS AIR telemetry system. It is a high-performance radio that it has not only Airplane and Helicopter mode but also Multicopter and glider mode. The 6K has a text-to-speech function from audio output connector. So you can make sure of telemetry data safely without take your eyes off from your flying body. It is also equipped with vibrator function to inform you such as voltage drop. The 6K also supports Futaba S-FHSS system receiver. So you can also use R2006GS (S-FHSS system does not support telemetry function).
Go to the downloads tab and download the latest software upgrade to get two extra channels and a couple of more functions (like being able to use the telemetry current and voltage sensors)! Note you will need an PC and the CIU-3 USB Interface to ugrade.



NEWS 2017 - UPDATE YOUR T6K TO 8 CHANNELS!
Go to the downloads tab and download the latest software upgrade to get two extra channels and a couple of more functions (like being able to use the telemetry current and voltage sensors)! Note you will need an PC and the CIU-3 USB Interface to ugrade.

Telemetry system
A T-FHSS Air bidirectional communication system is used. The voltage of the battery mounted in the fuselage can be displayed at the transmitter during flight. Altitude, temperature and R.P.M data can be displayed at the transmitter by installing various optional telemetry sensors in the fuselage.

Speech function
Telemetry data can be listened to by plugging commercial earphones into the transmitter.

Built-in antenna
Antenna built into the transmitter provides a simple appearance and improves handling ease.

S.BUS/S.BUS2 servo setting function
S.BUS/S.BUS2 servo channel and various functions can be set by connecting the servo to the transmitter.

Power-saving type transmitter
Four AA's alkaline batteries can be used. The optional HT5F1800B (NiMH 6.0V, 1800mA) or FT2F2100BV2 (lithium-ferrite 6.6V, 2100mA) battery can also be used.

Vibration
A function that notifies the operator of various alarms by vibrating the transmitter can be selected.

Unique model memory system
The transmitter body contains a 30 model memory.

Mixing type selection
Fixed wing, helicopter, and glider mixing type can be selected to match the fuselage. In addition, 6 swash plate types can also be selected for helicopters. Multi-copter selection is also possible.

Digital trim
Rapid trimming during flight is possible. The sound changes at the center of trim. The step size can be arbitrarily changed. The trim position is displayed on the LCD.

Lever head length adjustment
The lever head length can be adjusted. Lever head shape that reduces slip during operation has been adopted.

Switch/VR position change and AUX channel function change
Mixing and other switches and VR can be selected. Since the function of the AUX channels (5ch, 6ch) can also be changed, original mixing, in addition to existing mixing, can be created by using the programmable mixing function.

Model data transfer function
Model data can be wirelessly transferred between 6K.




System Features:
  • 30-model memory
  • Function Voice Telemetry
  • 8-character model naming & User name
  • Trims: with storage of digital values
  • Functions: (ATV / EPA) by the end of servo travel adjustment
  • Stroke Servo: 3 settings and exponential function (EXP)
  • 4 switches / potentiometer 1
  • Failsafe: adjustable lanes 1-6
  • Mixes planes and helicopters
  • 2.4 GHz T-FHSS Air / S-FHSS
  • Stopwatch
  • Offset neutral
  • Trainer Mode
  • Servo Monitor
  • Adjustable battery alarm under multiple voltages
  • Audible and vibrating alarms
  • S.BUS Port

Helicopter Features:
  • 5-Point Throttle curve 1 priority to gas
  • Autorotation
  • Adjust not hover
  • Curve not 5 points, prioritize gas 1 + 2
  • Mixing device not / rear rotor
  • Swashplate Mixing / no
  • Menu development of the gyro gain
  • Swash plate types: H-1, HR3 (120°),H-3 , HE3, HN3 (120°) & H-2

Aircraft Features:
  • 2 programs mixing devices
  • Trim Flaperon
  • Mixing Flaperon / Differential
  • Mixing V-tail
  • Delta Mixing
  • Output 2nd aileron choice 6, 5, 4, 3 on track

Optional Telemetry Sensors when using R3006SB receiver:

  • Temperature sensor (loop): SBS-01T
  • Temperature sensor (EP models): SBS-01TE
  • Altitude sensor: SBS-01A
  • RPM sensor magnet type: SBS-01RM
  • RPM sensor optical type: SBS-01RO
  • RPM sensor brushless motor type: SBS-01RB
  • (Additionally the SBS-01V telemetry sensor for external voltage can be used together with the optional R3008SB receiver)

Receivers that can be used:
  • T-FHSS Air: R3006SB & R3008SB (Note, R304SB, R304SB-E T-FHSS Surface system receivers does not work with T6K)
  • S-FHSS: R2008SB, R2006GS & R2106GF (No telemetry functions)

R3006SB 2.4GHz T-FHSS S.Bus Receiver for T6K
The included R3006SB T-FHSS Air Receiver is S.BUS compatible and features Dual-Antenna Diversity - it also comes equipped to handle high voltage applications.

R3006SB Specifications:
  • T-FHSS Air 2.4G system
  • Dual antenna diversity
  • S.BUS, S.BUS2 system
  • Power Requirement: 4.8 - 7.4V Batteries
  • Battery F/S Voltage: It's set-up with the transmitter
  • Size: 43.1 x 25 x 8.8 mm
  • Weight: 8.5 g
  • 30-modellers minne
  • För Flyplan/helikopter/drönare
  • Ljud- och vibrationsvarningar
2295:-
Få först, betala sen Läs mer
Antal: 
30 dagars öppet köpFri frakt över 499:-Snabba leveranser

Populära tillbehör

  • Information
    • The Futaba 6K has T-FHSS AIR telemetry system. It is a high-performance radio that it has not only Airplane and Helicopter mode but also Multicopter and glider mode. The 6K has a text-to-speech function from audio output connector. So you can make sure of telemetry data safely without take your eyes off from your flying body. It is also equipped with vibrator function to inform you such as voltage drop. The 6K also supports Futaba S-FHSS system receiver. So you can also use R2006GS (S-FHSS system does not support telemetry function).
      Go to the downloads tab and download the latest software upgrade to get two extra channels and a couple of more functions (like being able to use the telemetry current and voltage sensors)! Note you will need an PC and the CIU-3 USB Interface to ugrade.



      NEWS 2017 - UPDATE YOUR T6K TO 8 CHANNELS!
      Go to the downloads tab and download the latest software upgrade to get two extra channels and a couple of more functions (like being able to use the telemetry current and voltage sensors)! Note you will need an PC and the CIU-3 USB Interface to ugrade.

      Telemetry system
      A T-FHSS Air bidirectional communication system is used. The voltage of the battery mounted in the fuselage can be displayed at the transmitter during flight. Altitude, temperature and R.P.M data can be displayed at the transmitter by installing various optional telemetry sensors in the fuselage.

      Speech function
      Telemetry data can be listened to by plugging commercial earphones into the transmitter.

      Built-in antenna
      Antenna built into the transmitter provides a simple appearance and improves handling ease.

      S.BUS/S.BUS2 servo setting function
      S.BUS/S.BUS2 servo channel and various functions can be set by connecting the servo to the transmitter.

      Power-saving type transmitter
      Four AA's alkaline batteries can be used. The optional HT5F1800B (NiMH 6.0V, 1800mA) or FT2F2100BV2 (lithium-ferrite 6.6V, 2100mA) battery can also be used.

      Vibration
      A function that notifies the operator of various alarms by vibrating the transmitter can be selected.

      Unique model memory system
      The transmitter body contains a 30 model memory.

      Mixing type selection
      Fixed wing, helicopter, and glider mixing type can be selected to match the fuselage. In addition, 6 swash plate types can also be selected for helicopters. Multi-copter selection is also possible.

      Digital trim
      Rapid trimming during flight is possible. The sound changes at the center of trim. The step size can be arbitrarily changed. The trim position is displayed on the LCD.

      Lever head length adjustment
      The lever head length can be adjusted. Lever head shape that reduces slip during operation has been adopted.

      Switch/VR position change and AUX channel function change
      Mixing and other switches and VR can be selected. Since the function of the AUX channels (5ch, 6ch) can also be changed, original mixing, in addition to existing mixing, can be created by using the programmable mixing function.

      Model data transfer function
      Model data can be wirelessly transferred between 6K.




      System Features:
      • 30-model memory
      • Function Voice Telemetry
      • 8-character model naming & User name
      • Trims: with storage of digital values
      • Functions: (ATV / EPA) by the end of servo travel adjustment
      • Stroke Servo: 3 settings and exponential function (EXP)
      • 4 switches / potentiometer 1
      • Failsafe: adjustable lanes 1-6
      • Mixes planes and helicopters
      • 2.4 GHz T-FHSS Air / S-FHSS
      • Stopwatch
      • Offset neutral
      • Trainer Mode
      • Servo Monitor
      • Adjustable battery alarm under multiple voltages
      • Audible and vibrating alarms
      • S.BUS Port

      Helicopter Features:
      • 5-Point Throttle curve 1 priority to gas
      • Autorotation
      • Adjust not hover
      • Curve not 5 points, prioritize gas 1 + 2
      • Mixing device not / rear rotor
      • Swashplate Mixing / no
      • Menu development of the gyro gain
      • Swash plate types: H-1, HR3 (120°),H-3 , HE3, HN3 (120°) & H-2

      Aircraft Features:
      • 2 programs mixing devices
      • Trim Flaperon
      • Mixing Flaperon / Differential
      • Mixing V-tail
      • Delta Mixing
      • Output 2nd aileron choice 6, 5, 4, 3 on track

      Optional Telemetry Sensors when using R3006SB receiver:

      • Temperature sensor (loop): SBS-01T
      • Temperature sensor (EP models): SBS-01TE
      • Altitude sensor: SBS-01A
      • RPM sensor magnet type: SBS-01RM
      • RPM sensor optical type: SBS-01RO
      • RPM sensor brushless motor type: SBS-01RB
      • (Additionally the SBS-01V telemetry sensor for external voltage can be used together with the optional R3008SB receiver)

      Receivers that can be used:
      • T-FHSS Air: R3006SB & R3008SB (Note, R304SB, R304SB-E T-FHSS Surface system receivers does not work with T6K)
      • S-FHSS: R2008SB, R2006GS & R2106GF (No telemetry functions)

      R3006SB 2.4GHz T-FHSS S.Bus Receiver for T6K
      The included R3006SB T-FHSS Air Receiver is S.BUS compatible and features Dual-Antenna Diversity - it also comes equipped to handle high voltage applications.

      R3006SB Specifications:
      • T-FHSS Air 2.4G system
      • Dual antenna diversity
      • S.BUS, S.BUS2 system
      • Power Requirement: 4.8 - 7.4V Batteries
      • Battery F/S Voltage: It's set-up with the transmitter
      • Size: 43.1 x 25 x 8.8 mm
      • Weight: 8.5 g
  • Tillbehör
  • Reservdelar
  • Manualer
  • Passar till
  • Tips & Råd
    • The Futaba 6K has T-FHSS AIR telemetry system. It is a high-performance radio that it has not only Airplane and Helicopter mode but also Multicopter and glider mode. The 6K has a text-to-speech function from audio output connector. So you can make sure of telemetry data safely without take your eyes off from your flying body. It is also equipped with vibrator function to inform you such as voltage drop. The 6K also supports Futaba S-FHSS system receiver. So you can also use R2006GS (S-FHSS system does not support telemetry function).
      Go to the downloads tab and download the latest software upgrade to get two extra channels and a couple of more functions (like being able to use the telemetry current and voltage sensors)! Note you will need an PC and the CIU-3 USB Interface to ugrade.



      NEWS 2017 - UPDATE YOUR T6K TO 8 CHANNELS!
      Go to the downloads tab and download the latest software upgrade to get two extra channels and a couple of more functions (like being able to use the telemetry current and voltage sensors)! Note you will need an PC and the CIU-3 USB Interface to ugrade.

      Telemetry system
      A T-FHSS Air bidirectional communication system is used. The voltage of the battery mounted in the fuselage can be displayed at the transmitter during flight. Altitude, temperature and R.P.M data can be displayed at the transmitter by installing various optional telemetry sensors in the fuselage.

      Speech function
      Telemetry data can be listened to by plugging commercial earphones into the transmitter.

      Built-in antenna
      Antenna built into the transmitter provides a simple appearance and improves handling ease.

      S.BUS/S.BUS2 servo setting function
      S.BUS/S.BUS2 servo channel and various functions can be set by connecting the servo to the transmitter.

      Power-saving type transmitter
      Four AA's alkaline batteries can be used. The optional HT5F1800B (NiMH 6.0V, 1800mA) or FT2F2100BV2 (lithium-ferrite 6.6V, 2100mA) battery can also be used.

      Vibration
      A function that notifies the operator of various alarms by vibrating the transmitter can be selected.

      Unique model memory system
      The transmitter body contains a 30 model memory.

      Mixing type selection
      Fixed wing, helicopter, and glider mixing type can be selected to match the fuselage. In addition, 6 swash plate types can also be selected for helicopters. Multi-copter selection is also possible.

      Digital trim
      Rapid trimming during flight is possible. The sound changes at the center of trim. The step size can be arbitrarily changed. The trim position is displayed on the LCD.

      Lever head length adjustment
      The lever head length can be adjusted. Lever head shape that reduces slip during operation has been adopted.

      Switch/VR position change and AUX channel function change
      Mixing and other switches and VR can be selected. Since the function of the AUX channels (5ch, 6ch) can also be changed, original mixing, in addition to existing mixing, can be created by using the programmable mixing function.

      Model data transfer function
      Model data can be wirelessly transferred between 6K.




      System Features:
      • 30-model memory
      • Function Voice Telemetry
      • 8-character model naming & User name
      • Trims: with storage of digital values
      • Functions: (ATV / EPA) by the end of servo travel adjustment
      • Stroke Servo: 3 settings and exponential function (EXP)
      • 4 switches / potentiometer 1
      • Failsafe: adjustable lanes 1-6
      • Mixes planes and helicopters
      • 2.4 GHz T-FHSS Air / S-FHSS
      • Stopwatch
      • Offset neutral
      • Trainer Mode
      • Servo Monitor
      • Adjustable battery alarm under multiple voltages
      • Audible and vibrating alarms
      • S.BUS Port

      Helicopter Features:
      • 5-Point Throttle curve 1 priority to gas
      • Autorotation
      • Adjust not hover
      • Curve not 5 points, prioritize gas 1 + 2
      • Mixing device not / rear rotor
      • Swashplate Mixing / no
      • Menu development of the gyro gain
      • Swash plate types: H-1, HR3 (120°),H-3 , HE3, HN3 (120°) & H-2

      Aircraft Features:
      • 2 programs mixing devices
      • Trim Flaperon
      • Mixing Flaperon / Differential
      • Mixing V-tail
      • Delta Mixing
      • Output 2nd aileron choice 6, 5, 4, 3 on track

      Optional Telemetry Sensors when using R3006SB receiver:

      • Temperature sensor (loop): SBS-01T
      • Temperature sensor (EP models): SBS-01TE
      • Altitude sensor: SBS-01A
      • RPM sensor magnet type: SBS-01RM
      • RPM sensor optical type: SBS-01RO
      • RPM sensor brushless motor type: SBS-01RB
      • (Additionally the SBS-01V telemetry sensor for external voltage can be used together with the optional R3008SB receiver)

      Receivers that can be used:
      • T-FHSS Air: R3006SB & R3008SB (Note, R304SB, R304SB-E T-FHSS Surface system receivers does not work with T6K)
      • S-FHSS: R2008SB, R2006GS & R2106GF (No telemetry functions)

      R3006SB 2.4GHz T-FHSS S.Bus Receiver for T6K
      The included R3006SB T-FHSS Air Receiver is S.BUS compatible and features Dual-Antenna Diversity - it also comes equipped to handle high voltage applications.

      R3006SB Specifications:
      • T-FHSS Air 2.4G system
      • Dual antenna diversity
      • S.BUS, S.BUS2 system
      • Power Requirement: 4.8 - 7.4V Batteries
      • Battery F/S Voltage: It's set-up with the transmitter
      • Size: 43.1 x 25 x 8.8 mm
      • Weight: 8.5 g
Recensioner ( st)
Lämna gärna en recension efter ditt köp! Vi har tyvärr ingen möjlighet att svara på frågor via recensionerna. Är det något du undrar om produkten rekommenderar vi att du kontaktar vår kundtjänst.

Ge ditt omdöme
Vi använder cookies. Besöker du vår websida så godkänner du detta, läs hela vår integritetspolicy härOK